Effect of partial replacement of coarse aggregate by polystyrene balls on the shear behaviour of deep beams with web openings

Shaaban, Ibrahim, Zaher, Amr H., Said, Mohamed, Montaser, Wael, Ramadan, Mohamed and Abd Elhameed, Ghada N. (2020) Effect of partial replacement of coarse aggregate by polystyrene balls on the shear behaviour of deep beams with web openings. Case Studies in Construction Materials.

[img]
Preview
PDF
Shaaban_etal_J.CSCM_2019_Effect_of_partial_replacement_of_coarse_aggregate_by_polystyrene_balls_on_the_shear_behaviour_of_deep_beams_with_web_openings.pdf - Accepted Version
Available under License Creative Commons Attribution.

Download (4MB) | Preview
[img]
Preview
PDF
Effect_of_partial_replacement_of_coarse_aggregate_by_polystyrene_balls_on_the_shear_behaviour_of_deep_beams_with_web_openings.pdf.pdf - Published Version
Available under License Creative Commons Attribution.

Download (6MB) | Preview

Abstract

Thirteen specimens were experimentally tested under single midspan concentrated loads to study the shear behavior of lightweight concrete (LWC) and normal weight concrete (NWC) deep beams with web openings. In this research, the term LWC refers to the concrete obtained by partially replacing aggregate by polystyrene foam balls not the concrete containing lightweight aggregate. This resulted in a weight reduction of LWC beams in this research by approximately 30 % compared to NWC compartments. The studied variables were the dimensions and location of openings, transverse reinforcement ratio, and shear span to depth ratio (a/d). It was found that the overall shear behavior and failure mode for LWC deep beams are comparable to those of the NWC specimens. This is very promising and encouraging to build lighter deep beams of similar structural behaviour as that of NWC deep beams. Dimensions of the openings have a significant effect on the behaviour of failure and shear strength of LWC and NWC deep beams. It was found that increasing the depth of the opening from 20 % to 40 % of the beam depth led to a reduction in the ultimate load by up to 46.4 %. Finite element modelling of the test beams was carried out to verify numerical results versus experimental work and both were very well correlated. In addition, a parametric study was conducted to assess the effect of internal stiffening around openings in deep beams. The maximum enhancement in the shear capacity was approximately 30 % for beams, internally strengthened by additional reinforcement on the perimeter of openings compared to the beams without any reinforcement around the openings. Strut-and-Tie model (STM) was carried out as a rational approach to predict the shear behaviour of studied beams. It was found that STM underestimates the shear of the studied beams compared to experimental results for different tested beams but the agreement between both of them was acceptable. It is recommended that the depth of opening should not exceed 20 % of the depth of the deep beam and if the depth of opening is more than that or lies in the shear span it is highly recommended to strengthen the opening internally by additional reinforcement around its perimeter.

Item Type: Article
Additional Information: October 6 Universities is acknowledged for funding this research project. The experimental work was carried out in the reinforced concrete laboratory at Ain Shams University. Technicians and staff are acknowledged for their valuable assistance.
Uncontrolled Keywords: Coarse aggregate, Polystyrene balls, Deep beams, Shear strength, Web openings, Finite element model, Strut-and-Tie model
Subjects: Construction and engineering
Depositing User: Camille Regnault
Date Deposited: 02 Jan 2020 11:49
Last Modified: 07 Jan 2020 08:15
URI: http://repository.uwl.ac.uk/id/eprint/6660

Downloads

Downloads per month over past year

Actions (login required)

View Item View Item

Menu